Starter Pack Value Bundle (CO2)

The Starter Pack Value Bundle (CO2) is designed for a broad introduction to CO2 laser cutting. You receive transparent, white, and black acrylic, wood materials, MDF, foam, hardboard, and film to immediately build a feel for the materials.

Why choose this bundle?

With a value bundle, you don't have to put everything together separately: you get a well-thought-out material set, suitable thicknesses, and enough stock to test, compare, or produce right away. This saves you research time and you save 20-50% compared to regular individual material prices.

Who is this bundle for?

For beginners, makers, schools, makerspaces, and small workshops looking for a practical basic set.

What is included in the bundle?

• 1x Transparent acrylic – 3 mm – clear
• 1x White acrylic – 3 mm – white
• 1x Black acrylic – 3 mm – black
• 1x MDF – 3 mm – brown
• 1x Basswood plywood – 3 mm – brown
• 1x Birch plywood – 3 mm – brown
• 1x PE rigid foam – 5 mm – black
• 1x EVA foam – 5 mm – grey
• 1x Hardboard – 3 mm – brown
• 1x Mylar film – 0.12 mm – clear

Use the bundle for test cards, sample pieces, decorations, test cuts, and small prototypes. Laser settings vary depending on the machine, material, and design. Therefore, always do a small test first.

Explore further

Also check out Value bundles, Acrylic, Plywood, MDF & fibreboard, and Plastics & films.

Formats and sizing

This bundle is available in several standard sizes. Not every material is available in this size (EVA foam and Basswood plywood). If a material is not available in the selected size, the nearest smaller available size will be supplied.

Check your machine

Always check whether the materials in this bundle are suitable for your machine. If you are in doubt, you can find out whether a material is suitable for your machine on the relevant material page.